Home Page Hydroponic Supplies Sitemap         AIR-2 Temperature/Humidity Controller The AIR-2 has the same features as the AIR-1 with the exception of separate temperature and humidity outlets. This allows you to control the temperature and humidity independently. Once you have connected your temperature control device (air conditioner, fan, etc) and a dehumidifier to the AIR-2, your desired temperature and humidity are automatically maintained. The AIR-2 is rated for 15 amps @ 120 volts. CDN Price $159.95 US Price $151.95 Shipping to Canada (CDN $):  $9.95 Shipping to US (CDN $):  $19.95 * Please note shipping price is for ground transportation. * Please note your order will be charged in CDN funds. Add to Cart   Item Description Manufacturer: C.A.P Custom Automated Products www.canadianwholesalehydroponics.com is proud to be an online distributor of C.A.P Products. C.A.P. strongly believes that the only way to design and manufacture controllers is the right way. The right way means understanding what expectations their customers have when they make an investment in their products, and designing and manufacturing controllers that meet or exceed their expectations. The right way means paying attention to details and not cutting corners. They are constantly striving to produce the most innovative products in our industry. They use only the finest quality components to ensure many years of trouble-free operation. They will only build products that conform to our stringent safety standards. They back their products with the best warranty in the industry, a 3 year "no hassle-no problem" product warranty. All of C.A.P.'s products are assembled in the USA   Note: OVERVIEW The AIR-2 controls (lowers) temperature by turning on an exhaust fan or AC unit. External remote temperature probe is very reliable and it can be placed up to 30” from the unit. Humidity is controlled independently of temperature. The AIR-2 has two standard receptacles to connect your cooling device (fan or AC) and your dehumidifier. The AIR-2 is a solid & reliable unit with a 3-year warranty! CONNECTIONS & OPERATION There are certain steps which should be taken to ensure a successful installation of your AIR-2. 1) Determine the desired location for the AIR-2. It should be at plant height and near a 120 volt power supply. 2) The external remote temperature probe can be uncoiled to place the probe up to 30” from the unit. * NOTE: DO NOT BEND TIGHTLY OR KINK THE SILVER CAPILLARY TUBE. 3) Mount the AIR-2 to a wall or other vertical surface. The ventilation slots must be positioned on the top and bottom of the unit. 4) Plug the exhaust fan or into the top receptacle on the right side. (Maximum 15 amps @ 120 volts) 5) Plug your dehumidifier into the lower right side receptacle. (optional) 6) Keep the AIR-2 far from any CO2 generator or other sources of high heat to eliminate faulty temperature readings. 7) Adjust the thermostat and humistat to the desired highest level you want to maintain. 8) Connect the power cord to a source of 120 volt power. * Maximum COMBINED load = 15 amps. * NOTE: The AIR-2 requires “free air movement” to maintain temperature and humidity accuracy. The top and bottom of the enclosure has ventilation slots to provide air-flow for the internal humistat. We recommend using an oscillating fan or similar air movement device to provide fresh air for the plants, and the sensors. PRECAUTIONS Do not expose the AIR-2 to water. Electrical shock may occur. Do not disable the fuse or put in a fuse that is not rated for 15 amps at 120 volts. Do not kink the capillary tubing! Your temperature will not read correctly. Do not open the AIR-2. There are no user serviceable parts inside.